Posts Tagged ‘garden’

STARTING SEEDLINGS IN A COLD FRAME

A cold frame is a simple structure placed in the garden that features structural sides (usually made of wood) and a top made of a transparent material such as clear plastic or glass. Starting seeds in a cold frame eliminates several of the difficulties of starting seeds indoors. However, it requires a small investment of time and money in the construction of the cold frame and careful attention on cold nights. Here’s a brief run down of what you need to know for successful cold-frame seed-starting.

  • WARMTH. From early March on, cold frames warm up significantly almost every day. When unvented, the interior temperature can easily top 90 degrees on a sunny day. The soil in seedling trays or soil blocks absorbs much of the solar radiation and heat, and the soil easily reaches temperatures that initiate seed germination. However, on cold nights the cold frame provides only 10-15 degrees of protection (depending on wind and the previous day’s high), so providing a bit of heat to stave off frost overnight is sometimes necessary. Sometimes throwing some old wool or polyester blankets on top can be enough; sometimes running a light bulb or Christmas lights within the box can do it. Generally some extra heat is wise if the outside temperature is predicted to drop below about 26 degrees and the frame contains frost-sensitive seedlings such as tomatoes, peppers, eggplants, basil, and certain flowers. (A cold frame with only brassicas and lettuces and greens will need no additional heat.) On sunny or warm days, venting is necessary–anything from cracking the lid to removing it entirely. Keep a thermometer handy: experiment a bit and you’ll get the hang of it.
  • MOISTURE. Seeds sown in a cold frame can be watered with abandon–no mess to worry about. Do monitor the seedlings at the end of the afternoon, as solar heat and breezes from venting can cause rapid moisture loss on a warm or sunny days.
  • LIGHT. When you use a cold frame, the  mighty sun takes care of your light requirements: no supplementation is necessary. Just be sure to place the cold frame in a spot that gets full sun exposure. (Keep in mind that leafless trees will fill out and shade the cold frame before tender seedlings can be put in the garden.)
  • HARDENING OFF. Seedlings grown from the start in a cold frame require almost no hardening off, as they are exposed to temperature swings and breezes from a young age. Maybe give them one or two days of resting in a semi-protected spot outside of the cold frame before putting them in the ground; other than that, you’re golden!

Summary: Cold frames provide an ideal environment for seed-starting. Gardeners are assured ample natural light and need not bother with much hardening off before transplanting. Cold nights are an issue: gardeners must monitor for sub-26 temps and provide additional insulation or supplemental heat on those nights if frost-tender crops are in the cold frame.

Pruning Raspberries

Pruning Raspberries

Raspberry Patch

Pruning raspberries is essential because fruit is only produced on new raspberry canes. The old growth must be removed from your raspberry patch each year.

There are two types of raspberries:
an everbearing and

June bearing

Ever Bearers

Our favorite type of raspberry is the ever bearer / primocane. These raspberries bear fruit in the summer on canes that grow up in the spring.

It’s much easier to grow ever bearers than June bearers. After the first freeze in the fall of the year, cut off all the canes at ground level. Easy Pruning!

Use a wood chipper to chop up the old raspberry canes. Add the chips back into the garden soil. The organic matter helps improve the soil.

Ever Bearer Raspberries July 15



The chance of the raspberries getting cane borer is reduced when you cut off all the canes.

If you want a June and August crop of raspberries, you can do it with some extra work.

After it freezes in the fall, prune the tops off the canes that bore fruit during the summer. Prune these canes
3 ½ feet high. Next year, fruit will grow on the lower part of the cane.

These short canes will produce berries in June. In August, the new canes that grow from the roots will produce berries at the top of the cane. They will continue to produce fruit until it freezes.

When pruning raspberries this way, remember to prune out the short canes that bore fruit in June.

Pruned Raspberries

Most people don’t bother with getting this double crop because:

  • The raspberry plants produce two small crops instead of one large crop.
  • There’s a lot more work when pruning raspberries this way. It’s easier to cut off all the ever bearing canes each fall.

 

 

  • Caroline – mid to late August until first frost (going strong when first frost comes)

Growing Strawberries

Fruits such as strawberries are just as easy to grow as vegetables in a garden.  You can plant your strawberries in a formal bed, or use them as a ground cover.  There are three main types of strawberries you must choose from when you want to start a new crop.  The first type is known as “June Bearing” strawberries, and these plants will produce fruit in the late spring.  Generally this type of strawberry ripens in a two to three week window.  The next type of strawberry is known as “Ever Bearing” strawberries, and they produce fruit in both the spring and the fall.  Finally the third type of strawberry is known as “Day Neutral”.  These types of strawberries produce fruit throughout the entire growing season.

Strawberries do best with full sunlight and need a minimum of six hours a day of sun.  The more sun your fruit receives the larger the crop will be, and the quality will be better as well.  Strawberries need a well drained soil, and sometimes like a sandy soil.  Strawberries prefer the soil pH to be between 5.3 and 6.5.  It is advisable to test your soil with a soil testing kit or have your soil analyzed by your local county agricultural agency.  Since strawberries can get Verticillium wilt they should not be planted where either tomatoes or peppers were recently planted.

June bearing strawberries are best planted in what is known as a matted row system.  Here plants are set in the ground 2 feet apart, and then in rows 3 feet apart.  This allows the strawberries to send runners freely through the free space.  Keep in mind that June bearing strawberries don’t bear fruit until the second year.  The Hill system of planting strawberries is used for day neutral and ever bearing varieties.  You should set your rows to be about 8 inches high and about 24 inches wide.  The plants are set in the ground about 12 inches apart, and should be set in rows.  With these types of plants you should remove the runners the first year so you can bear fruit.  As time passes the strawberry plants are less productive.  Therefore they need to be replaced after about three years of production.

Strawberries can be planted in the spring right after the danger of your last frost.  If the plant you are setting in the ground have any root damage, they should be trimmed prior to planting.  If the plants have any flowers they should be removed as well.  Set the plants in the ground with the roots pointing down, and spread the root system out.  The crown of the strawberry should be set so the midpoint is just even with the surface of the soil.  If the plant is set too deep it may rot.

Strawberries need to be properly watered, yet not over watered.  Make sure you water your plants in the morning so that the sun can dry the leaves, thus preventing diseases.  Black plastic should not be used as mulch for strawberries, as this raises the soil temperature, and strawberries don’t like an elevated soil temperature.  Remember to fertilize your strawberries for the best possible crop.  It is best to fertilize just after the plants are set in the ground, and also after the fruit is harvested.  When picking your strawberries use a delicate hand, as the fruit is soft and will tend to bruise rather easily.

Three Sisters Garden

What is a Three Sisters Garden?

It is an ancient method of gardening using an intercropping system which grows corn, beans, and squash crops simultaneously in the same growing area that is typically a rounded mound of soil, often called a hill.

Corn is the oldest sister. She stands tall in the center.

Squash is the next sister. She grows over the mound, protecting her sisters from weeds and shades the soil from the sun with her leaves, keeping it cool and moist.

Beans are the third sister. She climbs through squash and then up corn to bind all together as she reaches for the sun. Beans help keep the soil fertile by coverting the sun’s energy into nitrogen filled nodules that grow on its roots. As beans grow they use the stored nitrogen as food.

How do I grow a Three Sisters Garden?

In mid-Spring clear a sunny garden area of grasses, weeds, and large stones. The area should be roundish in shape and at least eight feet across. Cover the area with a few inches of compost or well rotted manure. Turn the compost in to loosen the ground and create a moisture retaining growing medium with increased fertility. Water it well. Check the growing area frequently over the next few weeks to remove any sprouted weeds.

In late-Spring sow about seven or eight corn seeds in the center of the growing circle, in a ring pattern, spaced out about six inches from each other. Plant the corn seeds an inch under the soil, firm the soil above by patting it down with the palm of your hand. Water the growing mound well. The corn will sprout and begin to grow in about two weeks.

After the corn has grown to about ten inches high, using a hoe or hand trowel, pull up some soil from the growing mound around the base of the corn stalks. The corn should not be buried entirely, it’s upper half should be above the soil that has been mounded around it’s stems. The corn will send roots into the mounded soil to hold it steady and upright in the wind.

After mounding soil around the base of the corn stalks sow about a dozen pole bean seeds in a ring pattern six inches outside the corn stalks. Push the bean seeds about an inch under the soil and firm the ground above them by patting it down with your hand. Water the growing mound well. The beans will usually begin to sprout in about 7-14 days.

About a week after the beans sprout, sow six or seven squash seeds in a ring about 12-15″ outside the beans. Push the squash seeds about an inch under the soil and firm the ground above them by patting it down with your hand. The squash seeds will sprout in about a week.

As the corn grows the beans will begin to climb, you can help them early on by wrapping the bean vines around the corn stalks. The squash will begin to grow it’s vines and the large squash leaves will soon cover the growing mound and shade its soil. On occasion help the squash continue to cover the mound by turning the ends of it’s vines towards the center of the mound. Water the mound well during weeks where there has been little or no rain.

When can we harvest our Three Sister’s Garden?

Corn may be harvested while in it’s green corn stage, but tradtionally it is left to ripen and is harvested in Autumn. The cob is sun dried and stored for winter use. To harvest green corn observe the silky threads coming from the tops of the ears, when the silk is dry and a dark brown color the corn may be harvested. To remove an ear of corn, hold the stalk a few inches below the ear. Pull the tip of the ear toward the ground until it snaps off.

Beans may be eaten fresh or allowed to mature and dry on the vine. Fresh beans can be harvested when the pods are firm and crisp, but before the seeds within the pods have begun to swell. Pick beans in late morning after the night-dew has dried from the plants. This helps to prevent the spread of bacterias which can harm the plants. Pick the beans carefully to avoid bruising or snapping the growing vines. Bean plants will continue to flower and more bean pods will develop if they are harvested before bean seeds can mature.

Squash should be picked only after its skin has hardened thoroughly. Be careful to not damage or break off the stem of the squash…this can wound the squash and it will begin to rot. Cut the stem 3-4″ from the fruit with a sharp knife. Allow the squash to sit in the sun for a few days to cure and the stem to dry. Store squash in a single layer and not touching each other, which can foster rot. Squash can last at least two months, depending on the variety.

Enjoy growing your Three Sisters Garden!

Protecting your garden

Keep the birds at bay with this jangly kitchen-gadget scarecrow.

 

Tin Man

What you’ll need

  • One 7-foot-long 2- by 3-inch wooden stud
  • Two ¾-inch wooden dowels
  • 4 large brass hooks
  • Twine
  • 2 metal spatulas
  • 4 sets of metal measuring spoons
  • 2 metal saucepans
  • Metal coffeepot
  • Metal colander
  • Wire
  • Old pair of jeans, shirt, and suspenders
  • Bandana

How to make it

  1. First, set one end of the wooden stud 18 inches into the ground. Next, cut the two dowels to measure 3 feet long and 1 foot long, respectively. Screw the brass hooks into the ends of both dowels.
  2. With twine, securely tie the longer dowel to the stud 10 inches from the top. Hang the spatula ‘forearms’ from the hooks and use safety pins to attach metal measuring spoon ‘fingers’ to the spatulas.
  3. Tie on the shorter dowel 18 inches below the top one. Then loop leg-length pieces of twine around the hooks on the short dowel.
  4. Now dress the scarecrow in jeans, using suspenders to hang them from the ‘shoulder’ dowel. Thread the twine through the legs and tie saucepan ‘boots’ to the ends. Button on a flappy shirt.
  5. For a head, fit an inverted metal coffeepot atop the stud. You can even drill holes in its side and screw on metal washers for eyes. Tie a bandanna around the ‘neck.’
  6. Cap it all off by using wire to firmly fasten a metal colander hat to the coffeepot handle and then attach measuring spoons for hair.

 

Make a bean pole teepee

 

A bean teepee creates a wonderful hiding hole for young kids during the summer months at the same time as providing a perfect support for growing pole beans!

You can locate your bean teepee either in the vegetable patch or in a spare corner of the garden – it adds the dimension of height and is not only useful and fun, but quite ornamental too. Just bear in mind that the teepee will cast a fair bit of shade once the beans have grown.

How to Make a Bean Teepee

You will need: 7 – 9 long bamboo poles, some twine, string or even masking tape, and runner or pole beans.

circular shape for bean teepee Start off by finding a suitable spot in your garden and dig the earth over in a circular shape. A circle with a diameter of 3-4 foot is usually perfectly adequate.Beans like well-drained soil, so add some compost and fertiliser if needed – like in this example!
positioning poles for bean teepee Firmly push the ends of the bamboo poles into the ground by about 3 inches on the outside of the circle.Leave a gap between two of the poles to act as the entrance to the bean teepee.
tieing bamboo poles together Tie the bamboo poles together firmly near the top using twine, string, a bit of old rope or even masking tape.There is absolutely no fine art in tieing the poles together – the main and only aim is to ensure they are all VERY firmly held in place, as no matter how careful kids are, they are likely to knock the poles when going in and out of the teepee!
planting pole beans Plant the runner or pole beans about 2 inches deep. Plant them on the inside of the teepee rather than the outside, as this makes it easier to hoe and keep weeds down – anything growing on the outside of the bamboo poles are weeds!It is usual to plant two beans per pole. That should ensure at least one healthy plant per pole.
bean teepee ready to grow Water generously.Beans usually take between 7 to 14 days to germinate. Once the seedlings appear, protect them from slug attacks.

When the beans are a few inches high, loosely tie them to the poles. From then on, they should find their own way up.

When the plants reach the top of the teepee after about 7-8 weeks, nip the growing ends off. Keep them well watered during a dry patch, especially once the pods have started forming.

Once the dense foliage of the runner or pole beans has climbed up the bamboo poles and provides a cover, your bean teepee is ready for it’s inhabitants. Pop a blanket inside for the perfect private hide-away!

Tips

Once the first bean pods are ready to be harvested, keep picking them every few days to ensure the plants keep flowering and producing more pods. Once a pod reaches full maturity, the flowering process is shut down.

Beans can be planted outside once the risk of frost is over, usually late May or the beginning of June in the more northern areas.

For an even more colourful display, interplant climbing flowering plants too, such as climbing nasturtiums or black-eyed Susan.

Cats love these shady hide-aways too!

How to build a planter box

Step 1: Build the Frames

Build the top and bottom frames out of the 1×2 cedar strips. You’ll be butting the ends together, so no mitering will be necessary. Fasten two 26″ strips to two 13″ strips to form each rectangular frame. (You’ll need to ensure that the length remains 26″; to do this, butt the ends of the shorter strip against the longer strips. The thickness of the two longer strips will add an inch to each end of the shorter strips, increasing their length to 16″. Do this at each end of the longer strips to form a rectangular frame 26″ long and 16″ wide.) Apply a bead of wood glue to the junctions of the strips; then nail together with a single nail in each junction in preparation for inserting screws to hold them more securely. Predrill the ends prior to screwing them together; this helps keep the ends from splitting. Then insert a screw in each corner.

Step 2: Attach the Side Panels

Stand the two frames on their sides and apply a bead of wood glue to the inside face of the bottom side frames (the long sides). Attach four side panels to each long side, smooth sides out, and nail from the inside to hold them in place. Make sure the frames are flush with the panel ends on at least one side, or the bottom panels won’t fit properly. If the panels are jagged on the other side, you can always smooth them with a trim saw later.
Because you’re nailing from the inside, you may have to drive the nails at a slight angle. The advantage of this is that it conceals the nailheads from the exterior face of the window box. Repeat on the other side of the box.

Step 3: Attach the End Panels

Stand the half-completed box on its end and apply a bead of wood glue to the inside face of the bottom end frames. Attach two panels to each end in the same manner that you used to attach the side panels, once again ensuring that the ends are flush on the bottom. Repeat the process on the opposite end.

Step 4: Attach the Bottom Panels

Check and adjust your box for square if necessary. Attach three bottom panels to form the base of the planter box, using wood glue and screws. The base will reinforce and brace the box. Drill several holes in the panels so that water can escape, or simply leave a gap between the panels.

Step 5: Finish the Box

Lightly sand any rough edges and corners to smooth out splinters. If you wish, you can stain, seal or prime and paint your planter to suit your home’s decor. Because you used cedar, however, it can stay unfinished: cedar is one of the best lumbers you can use for exterior applications. This planter is a good size for potted plants, but you may wish to add a plastic liner and fill it with soil (add a layer of gravel first). If you do, don’t forget to cut holes in the liner to line up with the drainage holes in the bottom of the planter.

Spring Checklist

Take advantage of the moderate temperatures to get a head start on what should be an annual spring home maintenance routine. EXTERIOR INSPECTION “It’s good to do a walk-around of your property, especially after a storm,” says Curtis S. Niles, Sr., owner of Armored Home Inspections, Upper Darby, PA, and president of the National Association of Home Inspectors (NAHI). “Winter is tough on roofs and chimneys.” It can also take its toll on windows, walls, foundations, gutters and decks. Roof. You don’t need to climb up there yourself; with binoculars and a keen eye, you can probably spot trouble. Do you see any shingle-shift, suggesting that some fasteners may have failed and need replacing? Any cracked or missing shingles? What about nail-pops? “We call them eyebrows,” Niles explains. “It’s when nails push the tabs of the shingles up, allowing water to get in where those nails are coming through.” All will need to be addressed to keep your roof at peak performance. Chimneys. If you have a masonry chimney, check the joints between bricks or stones. Have any fallen out? Is there vegetation growing out of them? Each signals water infiltration. Also, look for efflorescence—”a white calcium-like deposit that indicates your masonry joints are no longer repelling water but absorbing it,” says Niles. Consider re-sealing masonry with a clear, impermeable or water-resistant barrier material (like Thoroseal products). Brush it on, small areas at a time; let it absorb for 15 minutes, then reapply—it may need a couple of applications. Exterior Walls. Whether you have wood siding, stucco or brick, look for trouble spots, especially under eaves and near gutter downspouts. Water stains normally indicate that your gutters are not adequately containing roof runoff. If you have wood siding, check for openings, damaged areas or knots that have popped out, making way for carpenter ants, woodpeckers and other critters that may nest in or burrow through. Foundations. When inspecting the exterior of your home, be sure to examine the foundation from top to bottom for masonry cracks. “Routine caulking by homeowners won’t do the job,” says Niles. “Hire a foundation specialist who can employ a two-part epoxy injection system that will bond cracks chemically,” he adds. Windows. Leakage around windows will admit warm summer air and let cooled indoor air escape, so be sure to check that any caulking and weather stripping you have in place has remained intact. “A tight seal is the first line of defense against air and water,” says Marty Davis, marketing manager, Simonton Windows, Columbus, OH. If you experienced condensation inside the glass on double- or triple-glazed windows during the winter months, the weather seal has been compromised, and either the glass or the window will need to be replaced. Spring-clean your windows—inside and out—with a store-bought or homemade window cleaner (one cup rubbing alcohol, one cup water and a tablespoon of white wine vinegar will work just fine) and either a squeegee or a soft cloth. Never use abrasive cleaners or a high-pressure spray washer. You don’t want to scratch the glass or crack the caulking around each unit. If screens were on all winter, remove and clean them with mild detergent. Lay them on a dry surface, like a driveway to air-dry before putting them back on. “Never power-wash screens,” urges Davis, “it could damage the mesh.”

General Cleaning. Spring is a good time to clean areas of the house that often go neglected. Dust or vacuum chair rails, window casings, tops of wall-mounted cabinets and ceiling fans. Launder or dry-clean fabric draperies and use a damp cloth to clean wood and vinyl blinds. Vacuum upholstered furniture and mattresses and consider renting a carpet cleaner—anything you can do to remove settled dust, mites, and allergens will make for a cleaner, and healthier, home.

If you detect grease residue in the kitchen, consider washing cabinets, backsplashes and walls with warm water and mild detergent. The same is true in the bathroom, where soap residue and fluctuations in heat and humidity combine to create the perfect breeding ground for mold and mildew. While you’re cleaning tile, look for areas of worn or missing grout, as these may lead to more serious water damage if not repaired.

Air Conditioning. Just as you readied your furnace for fall, now is the time to make sure that air conditioning units are in good working order for the warmer months ahead. Change the filter, check hose connections for leaks, and make sure the drain pans are draining freely. In addition, vacuum any dust that has settled on the unit and connections; over time it can impact the air conditioner’s effectiveness. If you suspected problems with the efficiency or performance of the unit last summer, now is the time to call in a professional to check it out.

Attics. Search for signs that indicate insects and critters have colonized. Also, search aggressively for mold, which often takes the form of “gray or black blotches that look like staining,” according to Tim Gentry, vice president of technical services, DaVinci Roofscapes, Kansas City, KS. Proper insulation and good ventilation will deter mold growth in the attic, so take action now to prevent the problem from developing in the warmer months ahead.

Basements. The basement—prone to dampness and insects—must be part of any thorough seasonal maintenance effort. Dampness suggests higher than normal relative humidity, inadequate ventilation and the need for a dehumidifier. Check the base of poured-concrete walls. “Cracks start from the bottom up, not the top down,” Niles points out. “If there’s water penetration, it’ll show at the bottom of those cracks.” And be sure to use a flashlight to examine exposed framing. “If you see even a quarter-inch or so of tunneling on the wood,” says Niles, “call a pest control company immediately.”

Leaks. Spring is a good time to check for leaky faucets, clogged drains and sweaty pipes. Check under the kitchen and bathroom sink to make sure connections on pipes and hoses are properly sealed, and look for any wetness around the dishwasher that could signal an existing or potential problem. The same is true of your laundry room; check washer machine hoses for cracks, bulges or dampness. The same is true for hot water heaters, which may show sign of corrosion and leaks.

Lawns. Rake the lawn to remove any branches, debris and leaves that you might have missed in the fall; if left, they can suffocate the grass beneath. During the winter, soil compaction, along with chemical changes altering your soil’s PH, may have left your lawn vulnerable to weed growth and other issues. Even if you can’t see weeds, they are more than likely waiting for optimum conditions to propagate. If you want to prevent them from germinating, consider an organic herbicide; fertilizers are better suited to the fall.

Make sure outdoor water systems—pipes, faucets, and in-ground sprinkler systems—are in working order. Once the ground thaws completely, start preparing new garden beds for summer plants. And take stock of your garden tools and lawn-maintenance equipment, including lawn mowers, trimmers and hoses.

Decks and Patios. Look for warped, loose or splintered boards, and do a good sweep to remove any leaves and debris accumulated in the space between boards. “Whether it’s wood, plastic or composite, a deck should be cleaned every year to extend its life,” says Chuck Harris, owner, Custom Lumber Manufacturing Co., Dothan, AL. If the finish on your wood deck is faded or worn, now is the time to clean, stain, and reseal it. If you have composite decking, follow manufacturers’ recommendations on seasonal care. The same is true for wood and composite fences, pergolas, trellises and other structures. If you have a stone patio, a simple hose down provide be all the maintenance required (unless you detect moss or staining, in which case a more serious cleaning may be necessary).

Outdoor Furniture. If you stored your lawn furniture for the winter, bring it outdoors and give it a hose rinse, or wash it with a mild detergent. For metal furniture, check for signs of rust or paint erosion; a simple remedy of spray enamel will prevent further damage from sun, rain and humidity in the months ahead.

Grills. If your gas grill has remained idle over the winter months, check burner jets for clogs and obstructions, and be sure that gas hoses and connections are sound and secure. You’ll also want to check for propane. For charcoal grill owners, make certain your grill is clean of ash and free of grease residue. It’s a good habit to adopt throughout the grilling season, not just in the spring.

Preparing a Vegetable Garden for Winter

To prepare a vegetable garden for winter, you’ll want to do a great cleanup job in the fall. This garden care will make it easier to start the new growing season in the spring.
Winter squash
After a big harvest of
winter
squash
, prepare the vegetable
 garden for winter. See more
pictures of vegetable gardens.
You may be tempted to skip some of these last-minute chores, but they’re worth doing because they can make a big difference to the success of next year’s garden. While these tasks can be put off until the start of the growing season, you can expect to be busy with the vegetable garden in the spring. You’ll find it useful to have some of the work out of the way ahead of time.

As you finish harvesting crops and rows of garden space become available, it’s a good idea to plant a cover crop, or green manure, as part of your preparation for the following year. This is a crop that you don’t intend to harvest. It’s simply to provide protection for the soil underneath. When you prepare for your spring planting, you dig the whole crop into the soil. A cover crop will keep your precious topsoil from blowing or washing away, and tilling it into the soil in the spring will provide valuable organic matter to enrich the soil.

The cover crop will also shade the soil, preventing many cool-season weeds from germinating. It’s not necessary to plant the whole cover crop at one time to cover the entire garden; you can plant in each area of the garden as space becomes available.

Cover crops are not exclusively used over the winter. If you have a space in the garden that will be vacant for several weeks between plantings, a summer cover of buckwheat makes an ideal green manure. The buckwheat germinates quickly and covers the soil, preventing summer weeds from germinating. It’s hollow-stemmed and easy to turn into the soil when you plant your next vegetable.

Vegetable Garden Cover Crop Types

 

Variety Season to Grow
Amount of Seed/ 1000 Sq. Ft.
Rye
Winter
1 to 2 lbs.
Crimson Clover
Winter
1 lb.
Soybeans
Summer
3 to 5 lbs.
Hairy Vetch
Winter
3/4 to 11/2 lbs.
Winter Wheat
Winter
1 to 2 lbs.
Buckwheat
Summer
2 to 3 lbs.
Rape
Winter
2 to 5 oz.
Cowpeas
Summer
3 to 4 lbs.

As an alternative to planting a cover crop, you can prepare the vegetable soil

ahead of time. Tilling your soil in the fall can save you a great deal of time and help you get an earlier start in the spring because the soil is often too wet in early spring to use a spade or a rototiller. If you do till your soil in the fall, make sure to cover it with mulch to keep it from blowing away and to prevent massive winter weed germination. Consider soil preparation for the area of your garden where you plan to grow next season’s cool-season vegetables.

If you’re growing perennial vegetables, fall is the time to prepare them for winter survival. Remove old stems and foliage that have been killed back by frost to prevent the spread of disease organisms and insects that winter on old debris.

In cold climates, perennial vegetables should be protected with a blanket of mulch to prevent root damage from extreme cold temperatures. In mild climates, a coating of mulch will protect plants from the alternating freeze-and-thaw and prevent plants from heaving from the soil.

 

Growing a Vertical Garden

Vertical garden

 

 

1

  • Start any gardening project in spring, when air temperatures rise to 60 degrees F. Vertical garden vegetables don’t need warm soil, but do require frost-free nights.

  • 2

    Choose your wall for the garden. Put the vertical garden in a spot that gets full sunshine all day, with good air circulation and protection from any drying winds.

  • 3

  • Use deep, sturdy rain gutters for the vertical garden, to give vegetables room for growth and support. Cut the rain gutters to fit on the wall you choose, and build at least three to four “stories” of gardening space. Drill holes every 10 inches in the bottom of the gutters, to ensure drainage.

  • 4

    Secure the gutters to the wall with eye hooks, screws or nails every 6 inches. Leave 2 to 3 feet of space between each layer of gutters to give the plants room to grow.

  • 5

    Mix organic compost, peat moss and potting soil in equal parts as your planting mix. This mix gives the vegetables plenty of nutrition and drainage. Fill the gutters full of your mixture, then turn starter fertilizer such as 6-24-24 or 8-32-16 into the top 4 inches of soil to provide more nutrition.

  • 6

    Plant small, compact vegetables in a vertical garden to minimize space usage and avoid stressing the structure. Plant lettuce, cabbage, spinach, broccoli, herbs, beets, peas, carrots, garlic, onions and radishes. Choose only small tomato, cucumber, bean and pepper cultivars. Also plant flowers in with vegetables to make the garden more attractive.

eXTReMe Tracker